Bosch FCB 120-1V-NB, User Manual & Installation Manuallines

Page: 8 / 27

8
System Pressurized
Storage tank 100L 125L 200L 300L 500L 100L 125L 200L 300L 500L
Type
1C 2C
Volume of tank l
100 125 200 300 500 100 125 200 300 500
Diameter of tank mm
500 500 600 600 750 520 520 620 620 750
Length of the Tank mm
1025 1224 1245 1846 1900 1025 1224 1245 1846 1900
Approx Weight (empty
tank)
kg
42
47 56
80
115
52
60 75
107
145
Approx Weight ( filled with
water)
kg
142
172 256
380
615
152
185 275
407
645
Max. operating pressure
KPa 350
Inner tank Material
Enamel coated Steel
Outer cover
GI pre coated sheet
Insulation
50mm PUF insulation, CFC free
Provision for electrical
backup
1 ¼“ BSP INT thread
Cold water inlet
1” BSP EXT thread
Hot water outlet
1” BSP EXT thread
Table 3: Enamel Tank specification
* Note: Due to continuous product development, the product features & specifications, warranty terms and conditions are subjected
to modifications without notice.
System Non Pressurized-Polymer Tank
Storage Capacity L 125 250
Type l 1C
Diameter mm 500 700
Length mm 970 990
Approx Weight (empty tank) kg 14 22
Max. operating pressure KPa 0 ( Integrated with Float Tank)
Inner tank Food grade LMDPE, 5 mm thick
Outer cover LMDPE, 3 mm thick
Insulation Polyurethane Foam, 28-32 kg/m
3
density
5.0 Before installation
Make yourself familiar with the on-site conditions and
local regulations before commencing the installation.
5.1 General notes
We recommend that you engage the
services of a roofing contractor who will
be experienced in working on roofs and
aware of avoiding the risk of falling
DANGER: Risk to life through falls and
falling parts!
▶
Take all necessary steps against
possible fall while working on roofs.
▶ Always wear personal protective
clothing and safety equipment.
After completing the installation, check the
installation set, the collectors and the tank
are securely positioned.
Water Sample: It is mandatory to test the
water sample before choosing the right
system. The below table shows the
recommended solar water heater for
different water quality
Parameter
SS
tank Polymer
Tank Enamel
1-C Ename
l 2-C
Chlorides
(ppm)
< 50 < 600
< 250 < 250
Total
Hardness
(CaCo
3
)
ppm
< 150 < 300
< 300
< 900
PH 6.5-8.0 6.5-8.0 6.5-8.0 6.5-8.0
Table 6 Water quality