Bosch FCB 120-1V-NB, User Manual & Installation Manuallines

Page: 14 / 27

14
Fig 19
7
Installation of connection lines
7.1 Installing the dummy hose pipes
 Remove the plastic protection cap from the header
pipe.
 Insert the hose clamp into the hose
 Insert the dummy hose with hose clip into the
header tube.
 Tighten the hose clamp rigidly using screw driver.
Fig 20
7.2 Connecting the cold water hose pipe
Fig 21
 Connect one end of EPDM hose to the bottom
Header pipe of the second collector.
 Fix the hose pipe support bracket to the
second collector.
 Connect other end of EPDM hose to the cold
water outlet pipe of the tank using hose clamp.
 Route the hose pipe through support bracket.
7.3 Connecting hot water inlet pipe
Fig 22
 Remove the plastic cap from the header pipe.
 Insert one end of the EPDM hose into the
collector header and clamp is rigidly with hose
clamp.
 Connect the other end of the hose pipe to hot
water inlet pipe of the tank.
Dummy Hose Pipes