FLEXIDOME IP indoor 8000i
Hardware installation | en
15
Bosch Security Systems B.V.
Installation manual
2021-08 | 01 |
3.
Drill the 4 holes with the appropriate diameter drill to support your 5-6 mm (0.2 inch)
screws and plugs.
4.
Install 4 plugs in the holes.
5.
Put the cable through the center hole of the mounting plate.
6.
Attach the mounting plate to the surface with 4 screws. Tighten the screws between 4
and 7 Nm (3 and 5.2 lbfft).
6.1.2
Installing the mounting plate with conduit
–
For a camera mounted on a wall: make sure that the mounting plate is oriented in a
90º angle, with the holes parallel to the floor, for proper alignment of mounting
screws and logos.
