FLEXIDOME IP indoor 8000i
In-box configuration | en
11
Bosch Security Systems B.V.
Installation manual
2021-08 | 01 |
5
In-box configuration
In-box configuration of the camera can be done via a wired connection with the camera still
inside the box, by using a mobile device or PC.
1.
Connect a network cable with PoE, and wait 1 minute for the camera to power up.
2.
Connect and configure the camera via the wired network by using the web interface, the
Project Assistant app or the Configuration Manager.
For more detail about the Project Assistant app, refer to
5.1
SD card installation
i
Notice!
Bosch recommends the use of industrial micro SD cards with health monitoring.
1.
Unscrew the thumb screw of the microSD card compartment. No tools are needed.
2.
Open the lid of the microSD card compartment.
3.
Install the microSD card(s) in the microSD slot(s).
