Bosch EXTEGRA IP 9000 FX, Operation Manual

Page: 45 / 54

6 Iris open
7 Sets the pre-set scene for the corresponding button 1, 2, 3, 4, 5 and 6
8 Zooms the camera to pre-set scene numbers 1, 2, 3, 4, 5 and 6
To control a peripheral, follow these steps:
1.
Click the appropriate controls.
2. Move the mouse cursor over the video image. Additional options for controlling
peripherals are displayed with the mouse cursor.
AUX Control
Aux Control Tab
The AUX Control tab is used to enter pre-programmed keyboard control commands. These
commands are composed of a command number plus the appropriate function key (Show
scene, Set scene, AUX on, AUX off). A valid combination either issues a command to the
camera or displays an on-screen menu.
To access the AUX Control tab, go to the LIVE page and click the AUX Control tab.
(Refer to the User Command Table for a list of all AUX commands.)
By default, the device is configured for a total of 256 presets.
Some legacy systems may not support presets above 99. In this case, you can set the camera
to use only presets 1-99. Enter 151 on the keypad, and then click AUX on.
6.1.4
EXTEGRA IP 9000 FX Operation | en 45
Bosch Security Systems Operation Manual 2015.03 | 1.0 |