Bosch EXTEGRA IP 9000 FX, Operation Manual

Page: 20 / 54

– Vibrant – Enhanced contrast color reproduction and sharpness
The default setting depends on whether the camera is an in-ceiling camera or a pendant
camera.
Customize the mode, if necessary, for the specific requirements of the site by selecting
different values for the fields below.
In this case, the name of the user mode changes to “Custom.”
White Balance
Adjusts the color settings to maintain the quality of the white areas of the image.
Red Gain
The red gain adjustment offsets the factory white point alignment (reducing red introduces
more cyan).
Blue Gain
The blue gain adjustment offsets the factory white point alignment (reducing blue introduces
more yellow). It is only necessary to change the white point offset for special scene
conditions.
Saturation
The percentage of light or color in the video image (HD only). Values range from 60% to 200%;
the default is 110%.
Color hue
The degree of color in the video image (HD only). Values range from -14° to 14°; the default is
8°.
Gain control
Adjusts the automatic gain control (AGC). Automatically sets the gain to the lowest possible
value needed to maintain a good picture.
–
AGC (default): electronically brightens dark scenes, which may cause graininess in low
light scenes.
– Fixed: no enhancement. This setting disables the Max. Gain Level option.
If you select this option, the camera makes the following changes automatically:
–
Night Mode: switches to Color
– Auto Iris: switches to Constant
Fixed Gain
Use the slide to select the desired number for fixed gain. The default is 2.
Maximum Gain Level
Controls the maximum value the gain can have during AGC operation. To set the maximum
gain level, choose from:
–
Normal
– Medium
– High (default)
AE-response speed
Select the speed of the response of auto exposure. Options are Super slow, Slow, Medium
(default), Fast.
Sharpness
Adjusts the sharpness of the picture. To set the sharpness, use the slider to select a number.
The default is 12.
Shutter Mode
–
Fixed: The shutter mode is fixed to a selectable shutter speed.
– AutoSensUp: increases camera sensitivity by increasing the integration time on the
camera. This is accomplished by integrating the signal from a number of consecutive
video frames to reduce signal noise.
20 en | Configuration via IP, Advanced Mode EXTEGRA IP 9000 FX
2015.03 | 1.0 | Operation Manual Bosch Security Systems