Bosch EasyControl CT200B, Installation And Operating Instructions Manual

Page: 3 / 13

Product information
3 EasyControl – 6720884199 (2018/10)
3 Product information
3.1 Scope of delivery
Fig. 1 Scope of delivery
[1] EasyControl
[2] Quick Install Guide
[3] Screw with rawl plug 2 ×
[4] Wall plate
3.2 Accessories
The following accessories are available:
• Smart Radiator Thermostats
• EasyControl adaptor
• EasyControl app (free of charge).
Visit www.bosch-easycontrol.com for an up-to-date overview.
3.3 Warranty conditions
A manufacturer's warranty of 2 years is provided for EasyControl.
3.4 Declaration of Conformity (Europe)
Hereby, Bosch Thermotechnik GmbH, declares that the radio
equipment with type CT200 & CT200B are in compliance with
Directive 2014/53/EU.
The complete text of the EU Declaration of Conformity is available on the
Internet: www.bosch-easycontrol.com/manual.
3.5 FCC Statement (USA)
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• To assure continued compliance, any changes or modifications not
expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment. (Example - use
only shielded interface cables when connecting to computer or
peripheral devices).
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
3.6 IC Statement (Canada)
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference and
(2) this device must accept any interference, including interference that
may cause undesired operation of the device.
Caution: Exposure to Radio Frequency Radiation.
To comply with RSS 102 RF exposure compliance requirements, for
mobile configurations, a separation distance of at least 20 cm must be
maintained between the antenna of this device and all persons. This
device must not be co-located or operating in conjunction with any other
antenna or transmitter.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
Attention : Exposition aux rayonnements radioélectriques.
Pour se conformer aux exigences de conformité CNR 102 RF exposition,
pour des configurations mobiles, une distance de séparation d'au moins
20 cm doit être maintenue entre l'antenne de cet appareil et toutes les
personnes. Cet appareil ne doit pas être colocalisés ou fonctionnant en
conjonction avec une autre antenne ou transmetteur.
3.7 Data privacy
Information about data protection can be found on the EasyControl site
under Data protection.
1)
3.8 Data connection
▶ EasyControl supports open WLAN connections and WLAN
connections encrypted with WEP 128, WPA and WPA2 protocols.
WPA2 is the safest protocol and is therefore preferred.
▶ “Hidden” networks are not supported.
▶ EasyControl takes over the time setting of the Bosch server. If there is
no connection to the server, EasyControl can only be put into
operation in manual operation.
▶ All costs for creating an Internet connection and a smart device are to
be borne by the user.
▶ The type of connected heat source determines, which functions can
be used. Consult the EasyControl site to gain an overview of which
functions are available for which heat source.
1)
0010018147-001
2x
Quick install guide
1
2
3
4
1) See the back of this document for the web address.