9
Bulb Replacement
Attention!
Before touching a bulb make sure
that it is cold enough.
1.
Disconnect the equipment from the
power source.
2.
Remove the grease trap filters or the
exhaust hood screen.
3.
Replace the damaged lamp.
Use E14 3W max LED lamps only. For
more details, check enclosed leaflet
“ILCOS D” (alfanumeric position “1d”).
4.
Install the grease filters or the exhaust
hood screen.
5.
If the illumination does not work, befo
-
re you address to a Technical Support
Center, check please if the bulbs are
connected correctly
Failures
In case of questions about functioning or a
failure please feel free to contact the Techni-
cal Support Center.
(The list of the Technical Support Centers is
for your reference) Indicate please:
N°-E FD
Insert the numbers in the indicated fields.
The numbers are given in the plate, that is
located inside of the tool, you can see it only
after the filters are removed.