15
Mounting
■
Remove the exhaust hood from the wall
(9)
.
■ Make 4 perforations (Ш8 mm) and insert
4 expansion bolts
(10)
.
■
Again mount the exhaust hood on the wall
(11)
.
■ Make the final fixing with 4 screws 5 x 45
mm
(12)
.
■
Connect it to the power source, but do
not turn on the exhaust hood on the elec-
tric cabinet of the house.
■
Only for ducted application:
Lead the ventilation duct (
13A
- pipe and
collars are not included in the delivery set,
they shall be purchased additionally) to
the collar, located above the module of
the draw in engine.
Attach the other pipe flange to the duct
system if the exhaust hood is applied in
the duct mode.
■
Only for installation with air conducts:
If you want to use the exhaust hood in air
recirculation mode, fix deflector F on the
support G and lead the other pipe flange
to the union collar located on the deflector
(13F)
.
