14
Mounting
The exhaust hood is designed for installation
on a kitchen wall.
Note:
For mounting you may need special
parts.
■
In order to simplify the mounting process,
draw a central line on the wall
(1)
, attach
the sample so, that its central line was
above the drawn line on the wall, the
bottom of the sample shall be at the same
level, where the bottom of the exhaust
hood shall be after the installation
(2)
.
■ With a bore Ш 8 mm make two perfora
-
tions and insert there expansion bolts with
hooks
(3)
.
■
Mount the support of the air conduct «G»
on the wall connected with the ceiling, use
the base support as a sample for perfora-
tion (if available, the small oval perforation
in the support shall be located above
the line, drawn on the wall), mark with a
pencil 2 perforation locations, make perfo-
rations (Ш 8 mm), insert the 2 expansion
bolts.
Fix the support base of the air conduct on
the wall with 2 screws 5 x 45 mm
(4)
.
■
Mount the exhaust hood on the support
bases
(5)
.
■
Adjust the position
(6)
.
■
Mark the perforations to perform 6 the
final mounting
(7 - 8)
.
Attention!
Do not connect the equipment to the line till all installation works are completed.
