Bosch DSA E-Series (E2700), Installation Manual

Page: 8 / 80

8 en | Safety DSA E-Series (E2700)
2015.10 | V2 | DOC Installation manual Bosch Sicherheitssysteme GmbH
!
Warning!
Risk of bodily injury
Only move a populated cabinet with a forklift or adequate help from other persons. Attach
the stability foot before moving the cabinet. If you do not attach the stability foot, the cabinet
might become unstable, or it might fall. Always push the cabinet from the front to prevent it
from falling over.
A fully populated cabinet can weigh more than 636 kg (1420 lb). The cabinet is difficult to
move, even on a flat surface. If you must move the cabinet along an inclined surface, remove
the components from the top half of the cabinet, and make sure that you have adequate help.
!
Warning!
Risk of bodily injury
A qualified service person is required to make the DC power connection according to NEC
and CEC guidelines.
!
Warning!
Risk of bodily injury
An empty tray weighs approximately 56.7 kg (125 lb). Three persons are required to safely
move an empty tray. If the tray is populated with components, a mechanized lift is required to
safely move the tray.
!
Warning!
Risk of bodily injury
Each tray has more than one power cord. To remove all electrical current from the devices,
make sure that all of the power cords are disconnected from the power source and that the
two-pole 20-amp circuit breaker for the storage array has been disconnected.
!
Warning!
Risk of bodily injury
Each tray has more than one power cord. To remove all electrical current from the devices,
make sure that all of the power cords are disconnected from the power source.
!
Warning!
Risk of bodily injury
Do not use equipment in the cabinet as a shelf or work space.
!
Warning!
Hazardous moving parts
Keep away from moving fan blades.
!
Warning!
Risk of bodily injury
High leakage current earth connection essential before connecting supply.