FLEXIDOME IP 3000i IR | FLEXIDOME IP micro
3000i | DINION IP 3000i IR | FLEXIDOME IP turret
3000i IR
Configuration | en
33
Bosch Security Systems B.V.
User manual
2020-01 | V02 | DOC
–
The connection to the IP address is established.
The
Storage overview
field displays the logical drives.
Local Media
An SD card inserted in the camera can be used for local recording.
4
If the SD card is password protected, enter the password into the
Password
field.
The
Storage overview
field displays the local media.
Note:
SD card recording performance is highly dependent on the speed (class) and
performance of the SD card. It is recommended to use an industrial SD card with health
monitoring.
Local storage
To activate the ANR settings,
Recording 1
must be assigned to an iSCSI target and
Recording
2
to a local storage.
This function enables recording to the iSCSI target. If there is a network disconnection, the
video is recorded to the local storage. When the network is recovered, the video recorded to
the local storage is transferred to the iSCSI target and completes the missing information.
Activating and configuring storage media
Available media or iSCSI drives must be transferred to the
Managed storage media
list,
activated, and configured for storage.
Note:
A iSCSI target storage device can only be associated with one user. If a target is being used by
another user, ensure that the current user no longer needs the target before decoupling that
user.
1.
In the
Storage overview
section, double-click a storage medium, an iSCSI LUN or one of
the other available drives.
–
The medium is added as a target in the
Managed storage media
list.
–
Newly added media is shown as
Not active
in the
Status
column.
2.
Click
Set
to activate all media in the
Managed storage media
list.
–
The
Status
column shows all media as
Online
.
3.
Check the box in the
Rec. 1
or
Rec. 2
column to specify the recording tracks to be
recorded on the target selected.
Formatting storage media
All recordings on a storage medium can be deleted at any time. Check the recordings before
deleting and back-up important sequences on the computer's hard drive.
1.
Click a storage medium in the
Managed storage media
list to select it.
2.
Click
Edit
below the list.
3.
Click
Format
in the new window to delete all recordings in the storage medium.
4.
Click
OK
to close the window.
Deactivating storage media
A storage medium in the
Managed storage media
list can be deactivated. It is then no longer
used for recordings.
1.
Click a storage medium in the
Managed storage media
list to select it.
2.
Click
Remove
below the list. The storage medium is deactivated and removed from the
list.
Click
Set
to apply the changes.
