16
en | Configuration
FLEXIDOME IP 3000i IR | FLEXIDOME IP micro
3000i | DINION IP 3000i IR | FLEXIDOME IP turret
3000i IR
2020-01 | V02 | DOC
User manual
Bosch Security Systems B.V.
First, check the time zone setting. If it is not correct, select the appropriate time zone and
click
Set
.
1.
Click
Details
to edit the DST table.
2.
Click
Generate
to fill the table with the preset values from the unit.
3.
Click one of the entries in the table to make changes. The entry is highlighted.
4.
Click
Delete
to remove the entry from the table.
5.
Choose other values from the list boxes under the table, to change the selected entry.
Changes are immediate.
6.
If there are empty lines at the bottom of the table, for example after deletions, add new
data by marking the row and selecting values from the list boxes.
7.
When finished, click
OK
to save and activate the table.
Time server address
The unit can receive the time signal from a time server using various time server protocols and
then use it to set the internal clock. The device polls the time signal automatically once every
minute.
Enter the IP address of a time server.
Overwrite by DHCP
Select this checkbox to have the DHCP server give the time server date.
Time server type
–
Select
Time protocol
if the server uses the RFC 868 protocol.
–
Select the protocol that is supported by the selected time server. It is recommended to
select the
SNTP protocol
protocol. This protocol provides high accuracy and is required
for special applications and future function extensions.
–
Select the
TLS protocol
if the server uses the RFC 5246 protocol.
Click
Set
to apply the changes.
4.1.4
Display Stamping
Various overlays or stamps in the video image provide important supplementary information.
These overlays can be enabled individually and arranged on the image in a clear manner.
Camera name stamping
Select the position of the camera name overlay in the drop-down box. It can be displayed at
the
Top
, at the
Bottom
, or at a position of choice using the
Custom
option, or it can be set to
Off
for no overlay information.
If the
Custom
option is selected, enter values in the X and Y position fields.
Optionally, tick the
Underlay with full-width black bar
box to place a black bar beneath the
time stamp.
Logo
To place a logo on the image, select and upload an uncompressed .bmp file with a maximum
size of 300x300 pixels and 256 colors to the camera. Its position on the image can then be
selected.
Logo position
This option becomes available when the
Camera name stamping
option is enabled. Select:
–
Off
: This option is disabled.
–
To the left of the name
: The logo will be positioned to the left of the
Camera name
stamping
–
To the right of the name
: The logo will be positioned to the right of the
Camera name
stamping
