FLEXIDOME IP 3000i IR | FLEXIDOME IP micro
3000i | DINION IP 3000i IR | FLEXIDOME IP turret
3000i IR
Configuration | en
27
Bosch Security Systems B.V.
User manual
2020-01 | V02 | DOC
4.3.4
Enhance
High dynamic range
Choose between these options:
Off:
to disable High Dynamic Range (HDR)
Auto:
for automatic HDR. Depending on the scene, the camera can capture multiple exposures
to increase the Dynamic Range
Extreme:
similar to Auto, but with even higher Dynamic Range. Use this only in quiet scenes
and with low light levels. Artifacts can occur depending on the light level and movement in the
scene.
Notice!
Do not use HDR in scenes with fluorescent lighting.
HDR can only be active if Auto exposure is selected, and there is a match between the base
frame rate (selected in the installer menu) and the ALC fluorescent mode frequency. If there
is a conflict, a pop-up window will suggest a solution and adjust the appropriate settings.
Backlight compensation
Select
Off
to switch off backlight compensation.
Select
On
to capture details in high-contrast and extremely bright-dark conditions.
Contrast enhancement
Select
On
to increase the contrast in low contrast conditions.
Intelligent Defog
Select this to activate the automatic intelligent defog feature. This feature continuously
adjusts image parameters to provide the best picture possible under foggy or misty
conditions.
Intelligent Dynamic Noise Reduction
Select
On
to activate intelligent Dynamic Noise Reduction (DNR) which reduces noise based
on motion and light levels.
Sharpness level
Adjusts the
Sharpness level
between -15 and +15. A low (negative) value makes the picture
less sharp. Increasing sharpness brings out more detail. Extra sharpness can enhance the
details of license plates, facial features and the edges of certain surfaces but can increase
bandwidth requirements.
Temporal noise filtering
Adjusts the
Temporal noise filtering
level between -15 and +15. The higher the value, the
more noise filtering.
Spatial noise filtering
Adjusts the
Spatial noise filtering
level between -15 and +15. The higher the value, the more
noise filtering.
Intelligent streaming
The sharpness level,
Temporal noise filtering
and
Spatial noise filtering
can be automatically
adjusted here, through the encoder, for optimum intelligent streaming results.
Dynamic sharpness & noise filtering
Enable or disable the automatic adjustment of the encoder.
Priority encoder stream
Select stream 1, 2 or
Auto
as the priority stream for the encoder.
Auto
automatically selects
the optimal stream.
