FLEXIDOME IP 3000i IR | FLEXIDOME IP micro
3000i | DINION IP 3000i IR | FLEXIDOME IP turret
3000i IR
Configuration | en
15
Bosch Security Systems B.V.
User manual
2020-01 | V02 | DOC
–
Active Directory server (AD FS)
. A check mark in this check box indicates that the device
uses an active directory server.
Creating a new user
To create a new user, click
Add
in the section below
Authentication modes
.
In the box
User
, fill in the fields:
1.
User name: Enter a name with a minimum of 5 and a maximum of 31 characters.
2.
Group
, select the appropriate authorization level:
–
live is the lowest authorization level. At this level, it is only possible to view the live
video image, and switch between the different live image displays.
–
user is the middle authorization level. At this level, it is possible to operate the
device and playback recordings, but configuration changes are not possible.
–
service is the highest authorization level. Entering the correct password gives access
to all the functions, and allows all configuration settings to be changed.
3.
Type
, select either:
–
Password
for a new password.
Use a minimum of 8 and a maximum of 19 characters. The password must have
upper-case and lower-case letters, one or more numerical digits and one or more of
these special characters ! ? ” # $ % ( ) { } [ ] * - = . , ; ^ _ | ~ \
Special characters such as space @ : < > ‘ & + are not valid.
In this case, enter the new password a second time to eliminate typing mistakes.
–
Certificate
for a certificate that the new user is authorized to use.
4.
Click
Set
to confirm and create a new user.
4.1.3
Date/Time
Date format
Select the required date format.
Device date/Device time
If there are multiple devices operating in your system or network, it is important to
synchronize their internal clocks. For example, it is only possible to identify and correctly
evaluate simultaneous recordings when all devices are operating on the same time.
1.
Enter the current date. Since the device time is controlled by the internal clock, it is not
necessary to enter the day of the week – it is added automatically.
2.
Enter the current time or click
Sync to PC
to apply the system time from your computer
to the device.
Note:
It is important that the date/time is correct for recording. An incorrect date/time setting could
prevent correct recording.
Device time zone
Select the time zone in which the system is located.
Daylight saving time
The internal clock can switch automatically between normal and daylight saving time (DST).
The unit already contains the data for DST switch-overs for many years in advance. If the date,
time and zone have been set up correctly, a DST table is automatically created.
If you decide to create alternative daylight saving time dates by editing the table, note that
values occur in linked pairs (DST start and end dates).
