12
en | Installation
DCN-D Conference Delegate Units
F.01U.265.631 | V1.0 | 2012.03
Installation and Operation manual
Bosch Security Systems B.V.
5
Installation
Default, the delegate unit comes in the single delegate mode and has the microphone button
installed. Read the
Section 7 Configuration
first, when you want to change the default delegate
settings and the delegate mode.
Figure 5.1
Default microphone button
5.1
Microphone buttons
The mode of the delegate unit indicates the type and number of microphone buttons that
must be installed. Refer to
Section 7 Configuration
.
5.1.1
Remove the microphone button
1.
To remove the microphone button (1), push the button tool trough the bottom side holes
as indicated.
–
The tool comes with the DCN-DBCM button (2) set (to be ordered separately).
Figure 5.2
Remove the microphone button (1)
NOTICE!
Before you install the microphone buttons, make sure that the delegate unit operates
correctly. Defective delegate units are always replaced with a delegate unit that contains the
default microphone button.
