14
en | Connection
DCN-D Conference Delegate Units
F.01U.265.631 | V1.0 | 2012.03
Installation and Operation manual
Bosch Security Systems B.V.
6
Connection
1.
Connect the delegate unit to the DCN system with the delegate unit cable (9).
–
Use the DCN socket (10) to make a loop-through with the delegate unit.
2.
Use the cable-to-unit clamp to lock the DCN cable to the delegate unit:
–
Put cable-to-unit clamp on the cable connector (55°~ 60° position).
–
DCN-DISCLM cable-to-unit clamp to be ordered separately.
3.
Plug cable and clamp into the unit:
4.
Clockwise rotate clamp and make clamp snap into the locking hole of the rear panel:
