6 720 808 869 (2014/06)
Compress 3000 DW FOO
30 | Appliance status information
▶ Press "ok".
The operating time for days 1 to 5 is saved.
Fig. 35
Start of the first operating time for days 6 and 7
▶ Repeat the steps above for the operating times for days 6
and 7.
Once you have set the second operating time for days 6 and
7, the process of setting the operating times is complete.
Fig. 36
Setting operating times
[1] Start of the first operating time
[2] End of the first operating time
[3] Start of the second operating time
[4] End of the second operating time
Deleting the operating time
▶ Set the start and end of the operating time to the same
time.
The operating time is deleted.
If you do not wish to set a second operating time:
▶ Set the start and end of the second operating time to the
same time.
The display will show "--:--".
Fig. 37
"
" symbol is displayed
During appliance operating time.
"
" symbol is displayed
Outside of appliance operating time.
Noise reduction mode programming - „Sil“ function
The „Sil“ function allows the selection of the ventilator speed in
order to get lower noise levels.
The device is factory set with the highest fan speed activated.
Fig. 38
„Sil“ function
Setting the noise reduction mode periods
2 noise reduction mode periods will be set in each of the
programming steps:
•
2 periods for days „1 to 5“ and 2 periods for days 6 and 7
6720646160-41.1V
6720646160-38.1V
1
2
3
4
Setting a lower speed will decrease the
appliance efficiency marginally. Activate the
lower speed only in situations where lower
noise levels are to be achieved.
In cases of moderate/strong wind it is highly
recommended to
DO NOT
use the noise
reduction mode, unless the air outlet of the
appliance is not directly exposed to the wind.
Direct and moderate/strong wind on the air
outlet grille may result in an abnormal
operation of the appliance and consequent
larger heating times.
6720804054-14.1V
6720801244-14.1V
