6 720 808 869 (2014/06)
Compress 3000 DW FOO
10 | Appliance details
Operating ambient air temperature range:
Operating ambient temperature range of the heat pump cycle:
-7/ +40 °C.
3.4
Storing and transportation
As a rule, the unit is to be stored and/or transported in its
original packaging, in upright position.
For transport over short distances (<500km), and provided
that original packaging is kept and due care is taken, horizontal
transportation is permitted. Nevertheless, an inclination angle
of up to 90° must be ensured, for compressor lifetime
assurance.
Both during transport and storage, ambient temperatures
between -20 °C and +60 °C are permissible.
3.4.1 Transport using a forklift
When transported by a forklift, the unit must remain mounted
in the base. The lifting rate should be kept to a minimum. Due to
its top-heaviness, the unit must be secured to avoid tipping
over. To prevent any damage, the unit must be placed on a level
surface!
Fig. 4
The appliance can operate beyond the
normal temperature range by using the
electrical heater only.
In case the unit has been horizontally
transported to place, it must be positioned
upright at least one hour before it can be
turned on for the first time.
6720807918-08.1V
WARNING:
Heat pumps are heavy and bulky. Australian
States and Territories have a Principal
Occupational Health and Safety (OH&S) Act
which contains requirements relating to the
handling of large, bulky or awkward items.
Persons installing this heat pump system
must be aware of their responsibilities and
be adequately trained and qualified in
accordance with local OH&S requirements.
WARNING:
Transport damage!
▶ To avoid transport damage, wait until the
appliance is at the installation location to
remove the protective packaging.
▶ Use straps to prevent the appliance from
becoming scratched.
▶ Use suitable means of transport to bring
the appliance to the installation location
(special car, pallet truck, etc).
