6 720 808 869 (2014/06)
Compress 3000 DW FOO
Appliance status information | 29
•
"P1" operating time (days 6 and 7)
•
"P2" operating time (days 1 to 5)
•
"P2" operating time (days 6 and 7)
•
"P3" operating time (days 1 to 5)
•
"P3" operating time (days 6 and 7)
•
"SIL" operating time (days 1 to 5)
•
"SIL" operating time (days 6 and 7)
"P1" operating time
The heat pump only goes into operation during the operating
times set at the factory. These cannot be changed:
Days 1 - 5: [00:00
06:00] and [16:00
19:00]
Days 6 - 7: [02:00
08:00]
Fig. 31
"P1" operating time
"P2" and "P3" operating times
The heat pump runs according to the operating times set by the
user.
Fig. 32
"P2" and "P3" operating times
Setting the operating times for "P2" and "P3"
4 operating times are set for each function:
•
2 operating times for days 1 to 5
•
2 operating times for days 6 and 7
Setting the operating times
▶ Call up function "P2" or "P3" (
section 5.6).
▶ Press "ok".
The start of the first operating time flashes.
Fig. 33
Start of the first operating time
▶ Set the start of the operating time by using the "+" and "-"
buttons.
▶ Press "ok".
The end of the first operating time flashes.
▶ Set the run time by using the "+" and "-" buttons.
▶ Press "ok".
The start of the second operating time flashes.
Fig. 34
Start of the second operating time
▶ Set the start of the second operating time by using the "+"
and "-" buttons.
▶ Press "ok".
The end of the second operating time flashes.
▶ Set the run time by using the "+" and "-" buttons.
6720646160-16.1V
6720646160-35.1V
If the start of the second operating time is set
so that it is within the first operating time, the
first operating time ends automatically when
the second operating time starts.
6720646160-39.2V
6720646160-40.2V
