6 720 808 869 (2014/06)
Compress 3000 DW FOO
Appliance status information | 25
5.2
Working display
Visible display symbol
Appliance allowed to operated (according to selected
operation program).
A square around the electric element symbol and/or around the
compressor symbol indicates if they are switched on.
Fig. 19 shows the display when only the compressor is
operating.
Fig. 19
Device operating
Visible display symbol
Appliance inhibited to operate (according to selected
operation program).
The electric element and compressor symbols are shown
without a square around them.
Fig. 20 shows the display when the appliance is inactive
(inhibit to operate according to the selected program mode).
Fig. 20
Device inactive
5.3
Operation programs
Visible display symbol „
“
Operating periods in accordance with defined programming
(P1, P2 or P3).
Visible display symbol „
“
Permanent operation (24 h/7 days) without defined
programming.
5.4
Setting the domestic hot water temperature
▶ Press the "+" or "-" button to set the desired value between
30 °C and 60 °C.
Fig. 21
Setting the temperature
▶ Press the "ok" button to confirm the setting.
6720808869-09.2V
6720808869-10.2V
The water temperature is set to 56 °C at the
factory.
The set value flashes until the setting is
confirmed.
If the setting is not confirmed within
10 seconds, the previously set value is
retained.
Once the temperature has been set, the
display indicates the water temperature in
the tank.
DANGER:
Scalding!
A hot water scald potential exists if the water
temperature is set above 50 °C. Children,
disabled, and elderly people are at higher
risk of being scalded.
▶ Always feel water temperature before
bathing or showering.
6720646160-13.1V
