15
SOLAR TANK
Important Note:
Please ensure you remove plastic transit plugs from tank and replace with
brass plugs supplied with panel fitting kit (These plastic plugs will not withstand solar water
temperature and will melt causing leakage from tank).
Solar tanks are available in 250 Litre, 300 & 400 Litres capacities. All three tanks have cold
water inlet and hot water outlets on both the left and right hand sides of the tanks for
convenience. The connection points not used
must
be sealed off with the brass plugs
supplied.
The Solar tanks have incorporated a single element electric solar booster, or the system can
be boosted via a gas booster separate to the solar tank.
The inner tank is manufactured from mild steel sheet coated with a special porcelain enamel.
The tank is protected from corrosion by two magnesium anode rods, which softens the water
and lengthens the service life of inner vessel.
The inner vessel is insulated by a thickened high-density, environment friendly polyurethane
thermal insulation layer.
The external casing is a high quality galvanized sheet shell, with outdoor coating technology,
anticorrosive and rust-resistant, makes for a longer service life.
250 Litre
300 Litre
400 Litre
DIMENSIONS (mm)
Height
1325
1545
1600
Diameter
620
620
710
Material & thickness of
inner vessel
BTC340
R-2.0mm
BTC340
R-2.0mm
BTC340
R-2.0mm
Material and thickness
of shell
Galvanised sheet
0.5mm
Galvanised sheet
0.5mm
Galvanised sheet
0.5mm
Insulation thickness
40mm
40mm
40mm
Minimum inlet Water
Pressure
200 kPa
200 kPa
200 kPa
Maximum inlet Water
Pressure
750 kPa
750 kPa
750 kPa
Connection Cold
20mm
20mm
20mm
Connection Hot
20mm
20mm
20mm
Connection solar
15mm
15mm
15mm
ELECTRICAL
(Not applicable for gas boosting)
Power
240v/50Hz
240v/50Hz
240v/50Hz
amps
15
15
15
Elements
3.6kW
3.6kW
3.6kW
Weight
75Kg
95Kg
112Kg
