manualshive.com logo in svg

Bosch B4512, Owner'S Manual

Share
Download
Bosch B4512 Owner'S Manual Download Page 59

B930 Actions menu

Use the Actions menu to reset sensors, change outputs,
see the test menu, see the RPS menu, go to an area,
update system firmware, or to view service bypassed
points.

Reset

Detection devices, such as smoke detectors and shock
sensors, might require a reset action before they return
to normal operation. This function momentarily removes
power from these devices to reset them.
 
Resetting sensors:
1. Press [Menu] to open the Main menu.
2. Press [Actions] to open the Actions menu option.
3. Press [Reset] to open the Reset menu option.
4. Enter your passcode and press [Enter]. The display

shows Sensors resetting for approximately 3 seconds
and then goes blank before returning to idle
disarmed text.

 
If you enter this function and the detector or sensor
resets momentarily, but then returns to a faulted
condition, the conditions causing the activation may still

15

15.1

Control Panels

B930 Actions menu | en

59

Bosch Security Systems, Inc.

Owner's Manual

2012.12 | 03 | F.01U.265.453

Summary of Contents for B4512





























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands