manualshive.com logo in svg

Bosch B4512, Owner'S Manual

Share
Download
Bosch B4512 Owner'S Manual Download Page 28

User and burglary trouble events

The security company can program a keypad to emit the
trouble tone (three tones followed by a pause
repeated), when a user or burglary trouble event occurs.
 
If the system is on, the display shows the number of
points with troubles and the name for each point.

Silence user and burglary trouble events

Press [Silence] or [ENTER] to silence the trouble tone.

View user and burglary trouble events

After a user enters a passcode, the name of the point in
trouble continues to scroll through the display. Press
[NEXT] to scroll text manually. Events scroll from oldest
to newest.

System trouble events

Examples of system trouble displays include Service AC
Failure and Service Battery Low. These displays appear
on all keypads in the system. All system trouble displays
begin with SERV or Service. Press [Silence] or [ENTER]
to silence the trouble tone. but the Service text clears
only after the faulted condition is corrected.

8.3

8.3.1

8.3.2

8.4

28

en | Trouble events

Control Panels

2012.12 | 03 | F.01U.265.453

Owner's Manual

Bosch Security Systems, Inc.

Summary of Contents for B4512





























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands