manualshive.com logo in svg

Bosch B4512, Owner'S Manual

Share
Download
Bosch B4512 Owner'S Manual Download Page 46

Part On menu

Use the Part On menu to turn areas Part On. Turning an
area Part On means to turn on only some of the points,
and thus part of the system. For example, your security
company might configure your system so that when you
use the Part On function, only the exterior doors and
windows turn on, whereas interior motion sensors do
not turn on.

Part On

Turning an area Part On turns on some points, or part of
the system, in the area and provides entry and exit
delay. For example, you can turn on the area and leave
through a door (within exit delay time) without creating
an alarm event.
 
Turning the perimeter on with an exit delay:
1. Press [Menu] to open the Main menu.
2. Press [On/Off] to open the On/Off menu option.
3. Press [Part On] to open the Part On menu option.
4. Press [Part On Delay] to open the Part On Delay

menu option.

5. Enter your passcode and press [Enter]. The keypad

shows Part On Delay.

 

13.2

13.2.1

46

en | B930 On/Off menu

Control Panels

2012.12 | 03 | F.01U.265.453

Owner's Manual

Bosch Security Systems, Inc.

Summary of Contents for B4512





























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands