manualshive.com logo in svg

Bosch B4512, Owner'S Manual

Share
Download
Bosch B4512 Owner'S Manual Download Page 136

RPS

Use the RPS menu for connection to Remote
Programming Software (RPS). Your security company
uses RPS to configure and service your security system.
RPS is intended for use by professional or licensed
installers only.

Answer

Use the Answer option to answer the phone (pick up
the phone line) to connect to RPS.
 
Using the Answer menu option to answer an incoming
call from RPS:
1. Press [MENU] to open the Main menu.
2. Use [NEXT] to go to the Actions menu option, and

press [ENTER], or simply press [3].

3. Use [NEXT] to go to the RPS menu option, and press

[ENTER], or simply press [4].

4. Press [1] or [ENTER] to reset the sensors with the

Answer option.

5. Enter your passcode and press [ENTER]. The keypad

shows RPS is connecting…. and then returns to idle
text.

 

24.4

24.4.1

136 en | B920 Actions menu

Control Panels

2012.12 | 03 | F.01U.265.453

Owner's Manual

Bosch Security Systems, Inc.

Summary of Contents for B4512





























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands