36
en | Adjustment of detection settings
AVIOTEC IP starlight 8000
2020.08 | 01 | F.01U.391.015
Operation and Commissioning Manual
Bosch Sicherheitssysteme GmbH
for each mask: 5 ... 120. A clock icon with a small smoke plume is displayed at the bottom
right-hand corner.
Verification time flames
The following settings (in seconds) are possible to assign an individual verification time
for each mask: 4 / 8 / 12 / 16. A clock icon with a small flame is displayed at the bottom
right-hand corner.
2.
Change the size and shape of the rectangle to your specific needs.
3.
Move the mask to the desired area in the picture.
4.
Select
Set
to confirm the changes.
Automask
Notice!
All automasks stored in the volatile alarm memory of the camera are lost when the supply
voltage is interrupted or switched off. Automasks that already have been saved will remain
unaffected.
Notice!
If you change the settings of
Verification time [s]
, it is necessary to renew the automasks.
1.
Navigate to
Configuration
>
Alarm
>
Fire detection
.
2.
Select
Automask
The system automatically generates predefined masks from the alarm memory. The
automasks are illustrated as rectangles with red dashed border.
3.
Adjust the automask to your specific needs.
If it is necessary, you can add individual masks (
Add mask
).
4.
Select
Set
to confirm the changes.
P
Automasks were added to the system.
Reset user interface
Notice!
All determined masks in the user interface will be deleted! Only automasks remain stored in
the alarm memory and can be regenerated.
If you want to reset the user interface to standard values:
1.
Click on
Defaults
.
2.
Press
OK
to confirm.
P
The system resets the user interface for fire detection to the standard settings.
