manualshive.com logo in svg

Bosch AVENAR panel, System Manual

Share
Download
Bosch AVENAR panel System Manual Download Page 5

AVENAR panel

Safety | en

5

Bosch Sicherheitssysteme GmbH

System manual

2022-07 | 5.0 | F.01U.378.910

1

Safety

!

Warning!

Live components and stripped cable! Risk of injury from electric shock. The system must be
current-free during connection work.

!

Warning!

Risk of overheating
Bosch provides no front door for this system. You are not allowed to operate the system with
a front door. Otherwise, the system can overheat, because the air vents are blocked.

i

Notice!

Bosch Sicherheitssysteme GmbH uses Open Source Software. For more information see
https://www.boschsecurity.com/xc/en/oss/.

i

Notice!

Installation must only be carried out by authorized specialist personnel.

!

Caution!

Do not use any pointed or sharp objects (e.g. screw drivers, pens, etc.) when operating the
touch-sensitive display. The touchscreen may not be exposed to direct sunlight. Both can
seriously damage the touchscreen.

!

Caution!

EN 62368-1: MS 3. The installation height is recommended to a maximum of 2 m.

i

Notice!

Have maintenance and inspection work carried out regularly by trained, qualified personnel.
Bosch recommends a functional and visual inspection at least once a year.

i

Notice!

The fire panel is designed for indoor installation.
After installing batteries, the poles must be masked. Appropriate masking strips are included
with the housing in which the batteries are installed.
Use fuses complying with national regulations to protect the power lines.

i

Notice!

Batteries must not be disposed of in household waste. Please take used batteries to the local
collection points. See www.boschsecurity.com/xc/en/weee/ for further information.

Summary of Contents for AVENAR panel













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands