10
en | AVENAR panel series
AVENAR panel
2022-07 | 5.0 | F.01U.378.910
System manual
Bosch Sicherheitssysteme GmbH
Functional modules are independent encapsulated units. They are placed into a slot of a
panel rail. The power supply and the data traffic with the panel are therefore provided
automatically. The module is identified by the panel with no further settings and operates
in the default operating mode (plug and play).
Wiring to external components is performed using compact connector/screw terminals.
After a replacement, only the connectors need to be reinserted, there is no need for
extensive rewiring.
Module
Description
Function
ANI 0016 A
Annunciator module Indicating system statuses, with 16 red and 16
yellow freely programmable LEDs
BCM-0000-B
Battery controller
module
Controlling the power supply to the panel and the
battery charge level
CZM 0004 A
Conventional zone
module
Connecting conventional peripheral devices using
four monitored conventional lines
ENO 0000 B
External notification
module
Connecting fire service equipment complying with
DIN 14675
FPE-5000-UGM Module interface to
UGM
Connection to UGM systems
IOP 0008 A
Input-output module Individual displays or flexible connection of various
electrical devices, with 8 independent digital inputs
and 8 open collector outputs
IOS 0020 A
Communication
module, 20mA
With S20 and RS232 interfaces
IOS 0232 A
Communication
module, RS232
Connection of two devices using two independent
serial interfaces, e.g. Plena or a printer.
LSN 0300 A
LSN bus module
300mA
Connection of an LSN loop with up to 254 LSN
improved elements or 127 LSN classic elements at a
maximum line current of 300 mA
–
Fire brigade peripheral module
A fire brigade peripheral module is connected via FPE-5000-UGM or via IOS 0020 A
functional module. The fire brigade peripheral module FMF-ADP-TTY connects fire service
devices e.g. a Fire service operating panel or a Fire brigade information center to the fire
panel.
i
Notice!
Safety Systems Designer can be used to plan fire alarm systems that conform to the relevant
limits (e.g. in terms of cable length and power supply).
i
Notice!
Safety Systems Designer for fire alarm systems enables the system dimensions, the energy
requirements and the quantity and prices of the elements required to be estimated at each
different phase in the planning process.
The software is designed for planners and engineering offices that want to produce a
quotation for a fire alarm system.
