Bosch AUTODOME IP starlight 7000i NDP?7512?Z30, Installation Manual

Page: 3 / 72

AUTODOME IP starlight 7000i Table of contents | en 3
Bosch Security Systems
Installation Manual
2021-03 | 1.2 |
Table of contents
1
Safety EN 5
1.1 About this Manual 5
1.2 Legal Information 5
1.3 Safety Precautions 5
1.4 Important Safety Instructions 5
1.5 Important Notices 9
1.6 Connection in Applications 11
1.7 Customer Support and Service 12
2 Unpacking 13
2.1 Parts List 13
2.2 Tools Required 13
3 Product description 16
4 Pre-installation Checklist 18
4.1 Stabilization 19
4.2 Configuring and Implementing Intelligent Tracking 19
5 Preparing the bubble 21
6 (Optional) Installing an SD Card 22
7 Replacing the trim ring and bubble 23
8 Mount Power Supply Box (Wall, Mast (Pole), and Corner Mounts) 24
9
Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts 26
9.1 Description 26
9.2 Route Wires and Attach Connectors 26
9.3 Route Power through Intermediate Power Supply Box 30
9.4 Attach Pendant Arm to Power Supply Box 33
9.5 Make Connections in the Power Supply Box 34
9.6 Installing the VGA-PEND-WPLATE 35
9.7 Attach Pendant to Arm and Tighten 38
10 Installing the Roof Parapet and Pipe Mounts 40
10.1 Description 40
10.2 Route Wires and Attach Connectors 40
10.3 Attach Cover Door to Power Supply Box 45
10.4 Installing the VG4-A-9543 Pipe Mount 46
10.5 Wire the Pipe Interface Board 47
10.6 Attach Pendant to Pipe and Tighten 51
10.7 Make Connections in the Power Supply Box 52
11 Finalizing installation 53
12
Replacing a Pendant Bubble 54
13
Connection 55
13.1 Connecting the AUTODOME camera to the PC 55
13.2 Power Cable and Wire Distances Guides 55
13.3 Ethernet Connections 56
13.4 Fiber Optic Ethernet Media Converter (Optional) 57
13.5 Alarms and Relay Connections 58
13.6 Audio Connections (Optional) 61
14 Troubleshooting 63
14.1 Rebooting the unit 63
14.2 Physical reset button 64
14.3 Customer Service and Support 66