26
en | Installing an In-Ceiling Camera in a Drywall Ceiling
AUTODOME IP 4000i
2017.08 | 1.0 | F.01U.xxx.xxx
Installation Manual
Bosch Security Systems
2.
Insert the camera (without the trim ring / bubble enclosure) into the hole in the ceiling.
Ensure not to pinch the cables.
3.
Turn each fastening screw to secure the clamps in the ceiling.
3×
4.
Tighten the clamps using the Phillips screwdriver to secure the housing to the ceiling.
!
Warning!
Over torquing the ceiling clamps can damage the clamp or ceiling. Only tighten the clamp
until it contacts the ceiling and you start to feel some resistance. If using a power
screwdriver, set the torque level to the lowest setting.
5.
Place the trim ring / bubble enclosure in position over the camera block, aligning the
three (3) screws. Tighten the screws firmly to secure the trim ring / bubble enclosure to
the in-ceiling bracket.
Summary of Contents for AUTODOME IP 4000i
Page 1: ...AUTODOME IP 4000i NDP 4502 Z12 NDP 4502 Z12C en Installation Manual ...
Page 2: ......
Page 43: ......
