Bosch AutoDome 100 Series, User Manual

Page: 9 / 20

AutoDome 100 Series Fixed Camera Advanced Setup | en 9
Bosch Security Systems, Inc. User Manual F.01U.216.346 | 1.0 | 2011.04
4.2.1 Main Menu
4.2.2 ALC Submenu
4.2.3 ALC -> SHUTGAIN Submenu
Function Selections Description
ALC Selects Submenu Accesses the Auto Level Control menu.
ENHANCE Selects Submenu Accesses the Picture Enhancement menu.
COLOR Selects Submenu Accesses the Color Control menu.
BLC ON, OFF, or selects submenu – Enables Back Light Compensation (BLC).
– Accesses the BLC submenu.
EXIT Exits this menu.
Function Selections Description
ALC LEVEL (-15 to +15) Adjusts the video output level.
SHUTGAIN Selects Submenu Accesses the Shutter and Gain control menu.
PEAK AVERAGE (-15 to +15) Adjusts the balance between peak and average
video control.
ALC SPEED ON, OFF, or selects
submenu
Adjusts the speed of the video level control loop.
EXIT Returns to the MAIN menu.
Function Selections Description
SHUTTER AES, FL, FIXED – AES (Auto Electronic Shutter): The camera
automatically sets the optimum shutter
speed.
– FL (Flickerless): Avoids interference from
light sources.
– FIXED: Allows the user to define the
shutter speed.
DEFSHUT 1/60 (1/50), 1/100, 1/120,
1/250, 1/500, 1/1000,
1/2000, 1/5000, 1/10K
The camera tries to maintain the selected
shutter speed as long as the light level of the
scene permits.
(Only available if SHUTTER is set to AES
mode.)
FIXSHUT 1/60 (1/50), 1/100, 1/120,
1/250, 1/500, 1/1000,
1/2000, 1/5000, 1/10K
Selects the shutter speed. (Only available if
SHUTTER is set to FIXED mode.)
SENSUP OFF or (2x to 10x) Selects the sensitivity factor the camera is set
to. (Only available if SHUTTER is set to AES
mode.)
GAIN AGC, FIXED – AGC mode: The camera automatically sets
the gain to the lowest possible value
needed to maintain a good picture.
– FIXED mode: The gain is set at a
predefined value.
MAXGAIN (0 to 26) Selects the maximum value the gain can have
during AGC operation.
FIXGAIN (0 to 26) Selects the gain setting. (Only available if GAIN
is set to FIXED mode.)
DAY/NIGHT
3 Selects submenu Accesses the Day/Night Control menu.