Bosch 630 Series Installation And Operation Manual Download Page 96

Page: 96 / 100

en |

Video Recorder 630/650 Series

F.01U.169.663 | v2.0 | 2012.02

Installation and Operation manual

Bosch Security Systems

Appendix

A.1

Software licenses

This product contains both software that is proprietary Bosch software licensed under the

Bosch standard license terms, and software licensed on the basis of other licenses.

A.1.1

Bosch software

All Bosch software © Bosch Security Systems.Bosch software is licensed under the terms of

the End User License Agreement (EULA) of Bosch Security Systems B.V. or Bosch Security

Systems Inc, as available together with the physical carrier (CD or DVD). Any use is subject to

agreement and compliance with such EULA, as applicable.

A.1.2

Other licenses — copyright notices

–

GPL v2 copyright notice: This product includes software licensed under the GNU GPLv2

Boston, MA 02110-1301, USA.

–

GPL v3 copyright notice: This product includes software licensed under the GNU GPL v3

http://fsf.org/

)

–

LGPL v2.1 copyright notice: This product includes software licensed under the GNU

Fifth Floor, Boston, MA 02110-1301 USA

–

SSL Copyright notice: This product includes software developed by the OpenSSL Project

for use in the OpenSSL Toolkit (

http://www.openssl.org/

)

–

CDDL Copyright notices: This product includes software licensed under the CDDL v1.0

At the time of printing this manual, the following other licenses apply to the following

software components included in the DVR 600 Series:

(

) Full texts of the appropriate licenses are available at the links below and are also delivered

together with the software on the physical carrier.

–

GNU GPL v2 —

http://www.gnu.org/licenses/gpl-2.0.html

–

GNU GPL v3 —

http://www.gnu.org/licenses/gpl-3.0.html

–

GNU LGPL v2.1 —

http://www.gnu.org/licenses/lgpl-2.1.html

–

OpenSSL —

http://www.openssl.org/source/license.html

–

CDDL v1.0 —

http://www.openssl.org/source/license.html

Bosch is committed to comply with the relevant terms of any open source license included in

its products. To this effect, Bosch has created a web site (www.boschsecurity.com/oss) to

enable any licensee of open source software to have access to the relevant source code or

other information that such licensee may be entitled to under the terms of a relevant license.

Any software that is licensed under an open source license, under the terms of which the

licensee is entitled to obtain the program or its source code, can be obtained through the

Name software component

License (*)

uboot, linux kernel, smartmontools, busybox, nbsmtp, rp-pppoe,

fdisk, kernel modules, findutil

GNU GPL v2

uclibc

GNU LGPL v2.1

dosfstools

GNU GPL v3

openssl

OpenSSL

cdrtools

CDDL v1.0, GNU GPL v2

Summary of Contents for 630 Series





































































































Search results

Summary of Contents for 630 Series

Reviews:

Related manuals for 630 Series

Brands by name

Popular brands

Bosch 630 Series, Installation And Operation Manual

Search results

Summary of Contents for 630 Series

Reviews:

Related manuals for 630 Series

Brands by name

Popular brands