Bosch 630 Series Installation And Operation Manual Download Page 40

Page: 40 / 100

en | Operating instructions

Video Recorder 630/650 Series

F.01U.169.663 | v2.0 | 2012.02

Installation and Operation manual

Bosch Security Systems

5.6.3

Main menu

Camera

The Camera menu is used to configure recording settings for the unit. The menu contains

eight submenus:

–

Camera - per camera Enable, Name of the camera, Covert, and Audio

–

Video Adjustment - per camera Brightness, Contrast, and Color

–

PTZ - per camera Port, Address, Protocol, and Baud Rate

–

Continuous Recording - per camera Resolution, Quality, and Frame Rate

–

Input Recording - per camera Resolution, Quality, Frame Rate, Pre-event, and Post-

event

–

Motion Recording - per camera Resolution, Quality, Frame Rate, Pre-event, and Post-

event

–

Network Live Streaming - per camera Enable, Resolution, Quality, and Frame Rate

–

Video Format - NTSC, PAL, or Auto Detect; VGA Output - select required VGA

resolution for monitor A.

Schedule

The Schedule menu is used to set recording types according to the hour and day of the week

and for exception days.

Display

The Configuration menu contains three submenus:

–

Language - set the language option for the unit

–

Monitor A - show Camera Name and Status, Date and Time, Playback and HDD Status,

Event Pop-up, and configure Sequence Dwell Times

–

Monitor B - show Camera Name and Status, Date and Time, Event Pop-up, and configure

Sequence Dwell Times

Event

The Event menu contains four submenus:

–

Input - per input Input Type, Camera, Relay Output, and PTZ preset

–

Motion - per camera Sensitivity, Relay Output, and Area setup

–

Alarm Acknowledge - Toggle between Post-event time and Manual

–

System - enable alarms for Disk fail, Disk full, Fan fail, System/Disk temperature,

Administrator Password change, Video loss, and Power On.

Network

The Network information menu contains four submenus:

–

TCP/IP - enable DHCP, set IP Address, Subnet, Gateway, DNS, HTTP Port, Bandwidth

limit, Enable RTSP and set RTSP port for 3GPP function, and ICMP on/off.

–

DDNS - set dynamic DNS for dyndns.org, sitesolutions.com, and tzo.com

–

Notification - send e-mail notification on Input, Motion detect, Disk fail, Disk full, Fan fail,

System/Disk temperature, Administrator Password change, Video loss, Power On

–

Mail - set SMTP server, SSL, User name, Password, To 1-3, From, and Subject.

System

The System information menu contains seven submenus:

–

Date/Time - set Date, Time, Date format, Time format, Time zone, and Daylight Savings

–

NTP - set NTP Time Server and Sync interval

–

Beeper - set unit to beep on Button, Input, Motion, System, or Video loss

–

User - set Usernames, Passwords, and User Levels for Users 1-10

Summary of Contents for 630 Series





































































































Search results

Summary of Contents for 630 Series

Reviews:

Related manuals for 630 Series

Brands by name

Popular brands

Bosch 630 Series, Installation And Operation Manual

Search results

Summary of Contents for 630 Series

Reviews:

Related manuals for 630 Series

Brands by name

Popular brands