Video Recorder 630/650 Series
Configuration menu | en
71
Bosch Security Systems
Installation and Operation manual
F.01U.169.663 | v2.0 | 2012.02
More E-mail Settings - From
This is the e-mail address that will appear as the sender of all e-mail originating from the unit.
More E-mail Settings - Subject
This is the subject that will appear in all e-mail sent by the unit.
More E-mail Settings - To
Enter up to three e-mail addresses that outgoing e-mail should be sent to.
6.6
System
6.6.1
Date/Time
Figure 6.20
System -Date/Time
1.
Enter the actual
Date
.
2.
Fill in the actual
Time
.
3.
Select a
Date format
which shows either the month (MM), the day (DD), or the year
(YYYY) first.
4.
Select either a 12-hour or a 24-hour clock
Time format
.
5.
Select a
Time zone
from the list (daylight saving time must be set manually).
6.
Set
Daylight Saving
to On to enable it. Fill in the day, month, and time of both
Start
and
End
time
, and the
Offset
if it differs from the information associated with your time zone.
6.6.2
NTP
The
Time server
function synchronizes the time of the unit with the time of a network time
server or another NTP-capable device. Choose either a Public Server to use a calibrated NTP
server on the Internet, or select a Private Server to set your own time source. Fill in the IP
address of the private network time server. Ensure that firewalls do not block NTP traffic via
UDP port 123.
1.
Press
NTP Test
to start time synchronization.
2.
Set the
Synchronization Interval
to keep the unit closly matched with the time source.
–
Intervals can be as frequent as hourly, or as long as monthly.
