Bosch 630 Series Installation And Operation Manual Download Page 41

Page: 41 / 100

Video Recorder 630/650 Series

Operating instructions | en

Bosch Security Systems

Installation and Operation manual

F.01U.169.663 | v2.0 | 2012.02

–

Configuration - Import and Export configuration, reset to Factory defaults, Update

firmware and Quick install

–

Hard Disk - set Overwrite, Disk full warning, Event partition, Auto delete, and format the

disk

–

System - set the IR remote control, DVR ID, Auto user logout time.

5.7

Search

To Search, press the search

key.

To Search using the mouse:

Move the cursor to the bottom of the screen to access the System Control Bar.

Click the search

icon.

–

The default search is a

Date/time

search.

Figure 5.5

Default menu - Search

Summary of Contents for 630 Series





































































































Search results

Summary of Contents for 630 Series

Reviews:

Related manuals for 630 Series

Brands by name

Popular brands

Bosch 630 Series, Installation And Operation Manual

Search results

Summary of Contents for 630 Series

Reviews:

Related manuals for 630 Series

Brands by name

Popular brands