16
| English
1 609 92A 09K | (14.6.13)
Bosch Power Tools
The light of this power tool is intended to illuminate the power
tool’s direct area of working operation and is not suitable for
household room illumination.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1
Lock-off button for On/Off switch
2
On/Off switch
3
Battery charge-control indicator
4
Battery pack *
5
Battery unlocking button
6
Vacuum hose*
7
Vacuum connection
8
Saw blade storage
9
Base plate
10
Adjusting lever for orbital action
11
Dust cover for vacuuming
12
Guide roller
13
“Cut Control” base
14
Saw blade*
15
“Cut Control” viewing window
16
Contact protector
17
Saw blade holder
18
“PowerLight”
19
Handle (insulated gripping surface)
20
Splinter guard
21
Lead for the parallel guide
22
Scale for mitre angle
23
Screw
24
Cutting mark, 0°
25
Cutting mark, 45°
26
Locking screw for parallel guide*
27
Parallel guide with circle cutter*
28
Centring tip of the circle cutter
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 81 dB(A); Sound power level 92 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745:
Cutting board: a
h
=8 m/s
2
, K=1.5 m/s
2
,
Cutting sheet metal: a
h
=5 m/s
2
, K=1.5 m/s
2
.
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with the fol-
lowing standards or standardisation documents: EN 60745
according to the provisions of the directives 2009/125/EC
(Regulation 1194/2012), 2011/65/EU, 2004/108/EC,
2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, Postfach 10 01 56,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
07.04.2010
Jigsaw
PST 18 LI
Article number
3 603 K11 0..
Rated voltage
V=
18
Stroke rate control
Orbital action
Stroke rate at no load n
0
min
-1
0 –2400
Stroke
mm
20
Cutting capacity, max.
– in wood
– in aluminium
– in non-alloy steel
mm
mm
mm
80
12
5
Bevel cuts (left/right), max.
°
45
Weight according to
EPTA-Procedure 01/2003
kg
1.9
Henk Becker
Executive Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Jigsaw
PST 18 LI
OBJ_BUCH-1204-002.book Page 16 Friday, June 14, 2013 2:03 PM
