14/64
About this product
Bosch Rexroth AG
, Material and information fl ow technology: HQ 2/C-H, HQ 4, 3 842 358 792/2016-12
Table 6: Direction of transport and damper position for WT 4, WT 4/F, WT 2/H, WT 2/F-H
Motor mounting M (standard)
Motor mounting M on left
1
)
Unloading
L
oading
-
Re
v
e
rsible oper
ation
Fig. 3:
S
A
!
!
!
!
M
D
=25 Nm
SW13
M
D
=25 Nm
SW13
Lateral guide mounted as lateral guide (S) or non-damped stop (A)
Please note:
The main direction of
transport of the lift
transverse unit is always
the same as the direction
of rotation of the motor.
Exception:
HQ 4
b
T
x b
L
= 443 x 443 mm
With these values, the
unloading HQ must be
rotated by 180° when
installed in order to
transport the WT
(see Fig. 4). This is the
only way to ensure secure
transport without the
WT getting stuck.
1
) The customer must switch to
motor mounting M on left
(see Section 7.5 “Conversion
to motor mounting M left
(by customer)” on page 19).
2
) Lateral guide mounted as a
lateral guide.
3
) Lateral guide mounted as a
non-damped stop instead of
a damper (only sensible with
unloaded WTs).
551261_2016_12_EN.indd 14
551261_2016_12_EN.indd 14
22.12.2016 10:26:35
22.12.2016 10:26:35
