Bosch 3 842 998 035 Assembly Instructions Manual Download Page 33

Page: 33 / 64

Assembly 33/64

3 842 358 792/2016-12, Material and information ﬂ ow technology: HQ 2/C-H, HQ 4,

Bosch Rexroth AG

7.6.11 Connecting the product to the pneumatic system

WARNING

High pneumatic pressure is present!

Risk of serious injury or death.



Switch off the compressed air supply to the relevant system component before

installing, removing or connecting the product to the pneumatic system.



Secure the system against unintended reactivation.

• For speciﬁ cations on compressed air and operating pressure, see page 58.

Fig. 18:

551 261-18

Pneumatic connection (HQ 2/C-H shown)

Please note:

• Connect the pneumatics

at X and Y. This charges

the system more quickly

and evenly.

• The pneumatic hoses on

all 4 ports must be the

same length.



Connect the lift

transverse unit to the

compressed air supply.

GLISH

551261_2016_12_EN.indd 33

22.12.2016 10:26:36

Summary of Contents for 3 842 998 035

































































Search results

Summary of Contents for 3 842 998 035

Reviews:

Related manuals for 3 842 998 035

Brands by name

Popular brands

Bosch 3 842 998 035, Assembly Instructions Manual

Search results

Summary of Contents for 3 842 998 035

Reviews:

Related manuals for 3 842 998 035

Brands by name

Popular brands