Bosch 3 842 998 035 Assembly Instructions Manual Download Page 52

Page: 52 / 64

52/64

Maintenance and repair

Bosch Rexroth AG

, Material and information ﬂ ow technology: HQ 2/C-H, HQ 4, 3 842 358 792/2016-12

Fig. 34:

551 261-30

SW4

SW3

Preparing to replace the chain

Please note:

To replace the ﬂ at-top

chain belt, belt section

BS 2/CH-HQ2, BS 4/C-HQ4

for the transverse conveyor

of the lift unit must be

removed.

Required tools

• Hex socket wrench, size 3

• Hex socket wrench, size 4

Preliminary steps

Allow the belt section to run

brieﬂ y and position the ﬂ at-

top plate with hole

(A, chain coupling position)

on the drive sprocket.



Now deenergize and

depressurize the system,

and secure it against

being reactivated.

Remove the headless

setscrew of the

belt section locking

mechanism.

Pull the belt section

up and off.

Remove the covers from

the drive heads.

Remove the cover

sheets from the chain

tensioners.

551261_2016_12_EN.indd 52

22.12.2016 10:26:36

Summary of Contents for 3 842 998 035

































































Search results

Summary of Contents for 3 842 998 035

Reviews:

Related manuals for 3 842 998 035

Brands by name

Popular brands

Bosch 3 842 998 035, Assembly Instructions Manual

Search results

Summary of Contents for 3 842 998 035

Reviews:

Related manuals for 3 842 998 035

Brands by name

Popular brands