English |
19
Industrial cordless screwdriver
ANGLE EXACT
12V-12-400
12V-6-600
12V-3-600
Maximum Power Boost speed
C)D)
min
-1
650
1040
1040
Max. torque, hard/soft screwdriving applic-
ation according to ISO 5393
C)
Nm
2.5–8.0
1.5–4.5
0.8–2.5
Maximum torque
C)E)
Nm
9.0
4.5
2.5
Weight according to
EPTA-Procedure 01:2014
A)
kg
1.0−1.4
1.0−1.4
1.0−1.4
A) Depends on battery in use
B) Limited performance at temperatures < 0 °C
C) Measured at 20–25 °C with rechargeable battery
GBA 12V 6.0Ah
.
D) Limited performance at speeds < 50 %)
E) Only possible in cycle operation: < 5 screws driven in per minute
Angled screw head
Adapter
■
1/4"
■
3/8"
1/4"
QC
1/4"
■
3/8"
QC
1/4"
Article number
0 607 453
617
0 607 453
620
0 607 453
618
0 607 453
630
0 602 496
020
0 602 496
021
0 602 496
022
Torque, hard/soft screwdriving
application according to VDI
2647
A)
Nm
20
25
20
20
15
15
20
Tightening torque at the flange
Nm
20
20
20
20
15
15
20
Weight according to EPTA-Pro-
cedure 01:2014
kg
0.20
0.20
0.20
0.20
0.15
0.15
0.05
A) The homologation according to VDI 2647 can be downloaded from www.bosch-professional.com.
Noise/vibration information
Noise emission values determined according to
EN 62841-2-2
.
Typically, the A-weighted sound pressure level of the power
tool is less than 70 dB(A). The noise level when working can
exceed the volume stated.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to
EN 62841-2-2
:
Impact tightening of fasteners of the maximum capacity of
the tool: a
h
<
2,5
m/s
2
, K =
1,5
m/s
2
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
u
Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage.
There is risk of injury
from unintentionally pressing the on/off switch.
Charging the Battery
u
Use only the chargers listed in the technical data.
Only
these chargers are matched to the lithium-ion battery of
your power tool.
Note:
The battery is supplied partially charged. The state of
charge is not sufficient to start up the tool. To ensure full bat-
tery capacity, fully charge the battery in the charger before
using your tool for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging process
does not damage the battery.
The lithium-ion battery is protected against deep discharge
by "Electronic Cell Protection (ECP)". When the battery is
discharged, the power tool is switched off by means of a pro-
tective circuit: The application tool no longer rotates.
Bosch Power Tools
1 609 92A 6RK | (09.11.2021)
