English–
31
Bosch eBike Systems
0 276 001 SPUen | (23.4.14)
540
Temperature error
The eBike is outside of the permissible temperature range. Switch
off the eBike system and allow the drive unit to either cool down or
heat up to the permissible temperature. Restart the system. If the
problem persists, contact your Bosch eBike dealer.
550
An improper load was detected.
Remove the load. Restart the system. If the problem persists,
contact your Bosch eBike dealer.
602
Internal battery pack error while charging
Unplug the charger from the battery pack. Restart the eBike
system. Plug the charger into the battery pack. If the problem
persists, contact your Bosch eBike dealer.
602
Internal battery pack error
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
603
Internal battery pack error
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
605
Battery pack temperature error
The eBike is outside of the permissible temperature range. Switch
off the eBike system and allow the drive unit to either cool down or
heat up to the permissible temperature. Restart the system. If the
problem persists, contact your Bosch eBike dealer.
605
Battery pack temperature error while
charging
Unplug the charger from the battery pack. Allow the battery pack to
cool. If the problem persists, contact your Bosch eBike dealer.
606
External battery pack error
Check the wiring. Restart the system. If the problem persists,
contact your Bosch eBike dealer.
610
Battery pack voltage error
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
620
Charging error
Replace the charger. Contact your Bosch eBike dealer.
640
Internal battery pack error
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
655
Multiple battery pack errors
Switch off the eBike system. Remove the battery pack and reinsert
it. Restart the system. If the problem persists, contact your
Bosch eBike dealer.
656
Software version error
Contact your Bosch eBike dealer so that he can perform a software
update.
No
display
Internal error in the display unit
Restart your eBike system by switching it off and back on.
Code
Cause
Corrective Action