English–
24
0 276 001 SPUen | (23.4.14)
Bosch eBike Systems
Inserting and Removing the Battery Pack
Always switch the battery pack off when inserting or
removing it from the holder.
In order for the battery pack to be inserted, the key
A5
must
be inserted into the lock
A6
and the lock must be unlocked.
To
insert the standard battery pack
A8
, place it with the
contacts on the lower holder
A9
on the eBike (the battery
pack can be inclined up to 7° to the frame). Tilt it into the
upper holder
A7
until it engages.
To
insert the rack-type battery pack
A2
, slide it with the
contacts facing ahead until it engages in the holder
A1
of
the rear rack/carrier.
Always check that the battery pack is locked in
place.
To do this, pull on the battery pack handle (after
the key has been removed).
Check if the battery pack is tightly seated. Always lock the
battery pack with lock
A6
; otherwise the lock can open and
the battery pack could fall out of the holder.
After locking, always remove the key
A5
from the lock
A6
.
This prevents the key from falling out and the battery pack
from being removed by unauthorized persons when the
eBike is parked.
To
remove the standard battery pack
A8
, switch it off and
unlock the lock with the key
A5
. Tilt the battery pack out of
the upper holder
A7
and pull it out of the lower holder
A9
.
To
remove the rack-type battery pack
A2
, switch it off
and unlock the lock with the key
A5
. Pull the battery pack
out of the holder
A1
.
A8
A5
A6
A9
A1
A2
A5
A6
A7
7°
