BOS Suspension Factory Series, Service Manual, Page: 23 / 32

23

Plan to use about 500ml of BOS AMX oil to fill your shock absorber

Fill the canister to the brim

Immediately insert the floating piston into the canister and push it to the
stop
- Make sure your canister is filled to the brim before inserting the
floating piston. There should be no air trapped between the piston
and the oil.
- Leave a cloth or oil pan under your shock absorber, oil will flow out
when installing the floating piston

Insert the inflation cap and put the retaining ring in position
Make sure the snap ring is correctly positioned in its groove.

Inflate the shock absorber slightly so as to position the cap against the ring
and to keep the dividing piston at the bottom of the canister
Required tools :
- Measuring cup
- BOS AMX1 Oil
Required tools :
- - Separating piston extractor tool (000019-O-031 et 000019-O-037)
Required tools :
- By hand
Required tool :
- Needle
- Air