BOS Suspension Factory Series, Service Manual

Page: 22 / 32

22
REASSEMBLY OF CYLINDER SET

Apply white grease on the compression block o-ring

Screw the compression block into the head

Screw the compression bloc with a torque of 30 Nm

Apply white grease on the floating piston o-ring

Spread the white grease on the top strip
Required tools :
- White grease
Required tools :
- By hand
Required tools :
- Tork wrench 32mm socket (Factory-R)/ 24mm socket (Factory)
Required Tools :
- White grease
Required tools :
- By hand