BOS Suspension Factory Series, Service Manual

Page: 18 / 32

18
ROD GUIDE SEALS CHANGE

Remove the seals from your rod guide using a hook and loop tool

Then remove the used guide ring(s) using tool 000020-SEO-001 and 91707-O-013

Position the sleeve on the guide ring and then screw the screw in so that the grooves are pressed into
the ring

Then tap the top of the tool to remove the ring

Replace the seals with white grease and press-fit the rings (refer to the sectional views below)
Required tools :
- Extractor tool with screw (ref : 000020-SEO-001)
- Extractor socket D18 (ref : 91707-O-013)
- Mallet