BorMann 036395, Manual, Page: 8 / 18

EN
WWW.BORMANNTOOLS.COM
8
1. USB charging cable, 2. Power socket, 3.Charger
Note: Due to the complex circuitry incorporated within this product. Charging must be carried out in an
environment with an ambient air temperature between 5°C to 45°C with the charger supplied. To prevent
overheating, do not cover the charger. Attention: If the cable is damaged or the non-self- resetting pro-
tective device is activated due to short circuit/overload the charger shall be scrapped. A replacement of
identical specification, design and application shall be obtained.
Operation
Screw driving operation
CAUTION: Adjust the torque setting ring to the proper torque level for your work.
CAUTION: Make sure that the screw bit is inserted straight in the screw head, or the screw bit may be damaged.
CAUTION: When the speed comes down extremely, reduce the load or stop the tool to avoid the tool damage.
Hold the tool firmly with one hand on the soft handle to control the twisting action.
Place the point of the screw bit in the screw head and apply pressure to the tool. Start the tool slowly.
Release the switch trigger as soon as the clutch cuts in.
Maintenance
CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance.
NOTICE: Never use gasoline, benzine, thinner, alcohol or the like. Discolouration, deformation or cracks may result.
Regularly clean the tool using a damp cloth. Do not use any abrasive or solvent-based cleaner. Never let any liquid get inside the tool and never immerse any
part of the tool into liquid.