BorMann 036395, Manual, Page: 6 / 18

EN
WWW.BORMANNTOOLS.COM
6
Reversing switch action
CAUTION: Always check the direction of rotation before operation.
CAUTION: Use the reversing switch only after the tool comes to a complete stop. Changing the direc-
tion of rotation before the tool stops may dam- age the tool.
CAUTION: When not operating the tool, always set the reversing switch lever to the neutral position.
Adjusting the handle position
In addition to the general pistol grip function, the screwdriver also incorporates a twist grip facility
that doubles its use as a general in line screwdriver, useful for screwdriving in areas with awkward
access. To change the handle position, press the handle release button and twist the handle through
180° until it clicks into position.
1. Reversing switch lever
Lighting up the Led Torch
CAUTION: Do not look into the Led Torch or see the source of light directly.
The cordless screwdriver also comes with a LED torch mounted just below the handle. This torch
illuminates the fastener being removed or installed by the screwdriver.
To light up the led torch, depress down the On/Off switch once directly. To light off the led torch,
depress down the On/Off switch again directly.
NOTE: Use a dry cloth to wipe the dirt off the lens of the led torch. Be careful not to scratch the lens
of torch, or it may lower the illumination.
1. LED Torch
2. On/Off switch of Led Torch
1. Handle release button