BorMann 036395, Manual, Page: 4 / 18

EN
WWW.BORMANNTOOLS.COM
4
Technical Data
Voltage: 3.6V
Max. torque: 4Nm
No-load speed: 0-200rpm
Type of battery: Li-ion
Cordless Screwdriver safety warnings
1. Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury.
2. Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring. Cutting accessory
contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock.
3. Hold power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a "live"
wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock.
4. Always be sure you have a firm footing. Be sure no one is below when using the tool in high locations.
5. Hold the tool firmly.
6. Keep hands away from rotating parts.
7. Do not leave the tool running. Operate the tool only when hand-held.
8. Do not touch the drill bit or the workpiece immediately after operation; they may be extremely hot and could burn your skin.
9. Some material contains chemicals which may be toxic. Take caution to prevent dust inhalation and skin contact. Follow material supplier safety data.
Battery Chargers
(i) Before charging, read the instructions.
(ii) For indoor use. Do not expose to rain.
Batteries
(1) The battery is to be disposed of safely.
(2) Do not crush, open or burn the battery. Exposure to potentially harmful materials may occur.
(3) In case of fire use Co2 dry chemical extinguisher.
(4) Do not expose to high temperatures >45°C. Cells may degrade at high temperatures.
(5) The battery must be charged by a constant current constant voltage transformer.
(6) Charge battery regularly in conditions between 5°C to 45°C with the specified charger designed for this battery.
(7) Store in a dry, well ventilated area within the recommended limits of 10°C to 30°C.
(8) Do not use battery if it has been stored at 5°C or less. Allow it to "normalise" at room temperature before usage/changing.
(9) During decommissioning remove the battery cell for recycling separately to the product, which is covered by the waste electrical and electronic equipment
directive. Insulate the terminals with adhesive insulating tape to prevent a short circuit, fire or explosion occurring.
Connection to the power supply
Make sure the power supply information on the machine's rating plate are compatible with the power supply you intend to connect it to. This appliance is
Class II* and is designed for connection to a power supply matching that detailed on the rating label and compatible with the plug fitted. If an extension lead is
required,use an approved and compatible lead rated for this appliance. Follow all the instruction supplied with the extension lead.
*Double insulated : This product requires no earth connection as supplementary insulation is applied to the basic insulation to protect against electric shock
in the event of failure of the basic insulation.
Lithium-ion material data sheet
(i) As a substance under normal conditions of use it is not considered a hazard to health. In the event of accidental release, measures to prevent spread must
be adhered. Do not contaminate rivers, waterways or drains.
(ii) Composition of lithium-manganese, lithium-cobalt and lithium salt as the organic solvent electrolyte (non aqueous liquid).
(iii) Hazardous Decomposition: None during normal operating conditions. If cell is ruptured hydrogen fluoride and carbon monoxide may be released.
Intended use
This cordless screwdriver is ideal for applications such as assembling flat pack furniture. It is intended for domestic use only. Any other application is considered
misuse.
Description of main parts (Pic.A)
1. 1/4''hex. bit holder
2. Torque Setting Ring
3. Battery capacity Indicator
4. Handle release button
5. Work lamp
6. Switch Trigger
7. Reversing switch lever
8. On/Off switch of Led Torch
9. USB Charging connection socket
10. Led Torch
11. Charger
12. Sleeve
13. USB charging cable
14. Soft Handle