Borg & Overström
GB
19
Install & Operation Manual
For this we recommend the use
of Bioguard Foam Descaler &
Sanitiser Spray.
Turn off water and remove the
service filter. Retain service filter
for reuse.
When the external cleaning
(minimum 5 minutes) is
completed, flush the machine
using the cold dispense lever
with clean water until the
dispense water runs clear.
Repeat briefly with the ambient
and sparkling levers.
Fit new filter. Turn on incoming
water supply and reconnect the
power.
10
12
11
13
Pre-flush the new filter to waste
using the ambient dispense lever
until the water appears clear
and is free of air. Flush through a
small amount of water to check
all functions.
Pay particular attention to the
dispense faucets and the tap
levers. For this use Bioguard
External Sanitiser & Clear Spray
and Sanitising Wipes.
Attend to any cosmetic marks
with Bioguard Rejuvenator &
Protector as needed.
Remember to include the drip
tray. If a Waste Overflow
System is fitted, empty this
and flush through with a small
amount of sanitisation fluid if
needed.
15
14
16
17
Please note that this sanitisation fluid contains an
active caustic/alkaline agent.
Always use responsibly and with care remembering
that due to its alkaline nature unnecessary
concentrated/prolonged contact with any materials,
including metals, can cause damage. Always rinse
all contact surfaces after use with clean water.
Avoid skin contact and wear
protective gloves when
handling sanitisation fluids.
In the event of any skin
contact, flush immediately
with clean, cold water.
5
mins
PINK
5
mins
